OP-GPON OLT 9008A
GPON DATA OLT WITH 8 PON PORTS

OPTILINK OP-GPON OLT 9008A complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. It supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment. It is based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.

Know More about product

OP-GPON OLT 9008A
System Capacity: OP-GPON OLT 9008A supports maximum 8 GPON ports.
Uplink Interface: OP-GPON OLT 9008A with 4 gigabit SFP ports, 4 gigabit combo ports, and 4 10G SFP+ ports.
Dimensions: 1U, occupies a small space.
Environmental Protection: Low power consumption and low operating cost.
Bus Optical Fiber Protection: The link can be automatically switched when trouble occurs in the optical fiber.
Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.
Network function
System Capacity Maximum coupling ratio:1:128
Backplane bandwidth:205G
MAC table capacity: 64K
Interface PON: 8
Uplink interface: 4 gigabit SFP slots, 4 gigabit TX/SFP combo ports, 4 10G SFP+ slots 
Attributes of the PON
Interface
The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps
Class B+ and Class C+ GPON module
Security: ONU authentication mechanism
Standards ITU-T G.984/G.988
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad physical link static/dynamic aggregation (LACP)
Ethernet – II
QoS Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WRR, SP and FIFO queue schedule
Limiting the uplink/downlink rate based on each ONU
DBA and SLA
VLAN Port-based VLAN
QinQ and flexible QinQ
Multicast L2 multicast
IGMP Snooping
MLD Snooping
Reliability Unidirectional Link Detection (UDLD)
Hot swap of the GPON optical module
Optical path protection of GPON (type B/C, hand-in-hand)
Abnormal luminescence ONU detection such as long
luminescence
Network Security

Limiting the maximum number of users on each port
Port isolation
Packet storm control
Flow-based ACL access control function
Transmission data encryption on the PON interface

Configuration Management Various management modes such as CLI, SNMP and telnet
Conducting software upgrade through TFTP/FTP
Debug output
Physical Characteristics Dimensions mm (W×D×H): 442.5x304x 44
Installation: standard 19-inch rack-mount
Weight: 5.25Kg
Environment Operating environment: 0?-45?; 10%-85% non-condensation
Storage environment: -40?-80?; 5%-95% non-condensation
Power supply Input voltage: AC90?240V, DC 36 ~ 72V
dual-power input, DC/AC power supply and hot-swap
  • kindly enter Name
  • kindly enter Telephone
  • kindly enter Email
  • kindly enter City
  • kindly enter State
  • kindly enter Country
  • kindly enter Message
  • kindly enter Message
  • kindly enter Message
  • SUBMIT